Ubiquiti airMAX NanoStation M2 Wireless Outdoor CPE/PtP Bridge. M2 & Loco M2

Ubiquiti NanoStation M2 Outdoor is a Wireless outdoor Radio, The NanoStation^®M can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or used as an airMAX^® CPE.– Wireless Access Point.

Ubiquiti airMAX NanoStation M2 Models 

• NanoStation M2 Loco
• Processor Specs: Atheros MIPS 24KC, 400MHz

• Memory Information: 32MB SDRAM, 8MB Flash
• Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet
• Ubiquiti NanoStation M2

1. Ubiquiti NanoStation M2 MIMO Wireless Bridge/Base Station – NSM2

The Ubiquiti NanoStation M2 features 2×2 MIMO technology and 150 Mbps real outdoor throughput up to 15km range. This therefore allows for links that are significantly faster and farther than ever before, thanks to NSM2.

Ubiquiti NanoStation M2 Outdoor Key Features

• Great Performance
• Dual Ethernet Connectivity
• POE Enabled
• Easy Installation
• Range: 13 km

The low cost, performance, and small form factor of the Ubiquiti NSM2 makes them extremely versatile and ideal in several different applications.

Next-Gen Antenna Design
New antenna array designs featuring 11dBi dual-polarity 11dBi at 2.4GHz. Optimized cross-polarity isolation and in a compact form factor.

Integrated AirMax Technology
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) AirMax protocol allows each client to send & receive data using pre-designated time slots scheduled by an intelligent AP controller.

Dual Ethernet Connectivity
The Ubiquiti NanoStation M2 provides a secondary Ethernet port with software-enabled POE output for seamless IP Video integration.

Intelligent PoE
Remote hardware reset circuitry of Ubiquiti NSM2 allows for the device to be reset remotely from the power supply location. In addition, any Ubiquiti NanoStation M2 can easily become 802.3af 48V compliant through the use of Ubiquiti’s Instant 802.3af adapter.

• Power Method: Passive Power over Ethernet (pairs 4, 5; 7, 8 return)
• Power Supply (included): 24V, 0.5A POE
• Max Power Consumption: 8 Watts

AirOS V
Version 5 of Ubiquiti’s AirOS builds upon the market-leading intuitive user interface loaded with advanced wireless configurations and routing functionality.

2. Ubiquiti NanoStation LocoM2 MIMO, PtP/PtMP Wireless Bridge, Base Station

The Ubiquiti NanoStation Loco M2 MIMO Base Station features a panel antenna and dual-polarity performance, making it ideal for point-to-multiPoint (PtMP) applications requiring high-performance CPE devices, all within a sleek form factor.

Ubiquiti NanoStation M2 Outdoor MIMO Key Features

• Intelligent QoS Priority – For seamless streaming
• Scalability – High capacity and scalability
• Long Distance – Capable of high-speed, carrier-class links
• Latency – Multiple features dramatically reduce noise
• PoE Enabled

New Leading-Edge Industrial Design
The original Ubiquiti NanoStation set the bar for the world’s first low-cost and efficiently designed outdoor broadband CPE. The Ubiquiti LocoM2 takes the same concept, with a redesigned sleek, and elegant form factor.

Next-Gen Antenna Design
New antenna array designs featuring 16dBi dual-polarity gain at 5GHz and 11dBi dual-polarity 11dBi at 2.4GHz. Both with optimized cross-polarity isolation and in a compact form factor.

Intelligent POE
The remote hardware reset circuitry of Ubiquiti NanoStation M allows for the device to be reset remotely from the power supply location. In addition, any Ubiquiti NanoStation can easily become 802.3af 48V compliant through the use of Ubiquiti’s Instant 802.3af adapter.